Marshall V-IO12-12G 1×2 12G Distribution Amplifier is a universal distribution amplifier / Line Extender that brings two SDI outputs from one SDI signal source; “Universal” Supporting all SDI, HDSDI types up to 12GSDI; Compliant with SMPTE ST 259, 292, 344, 424, 2081 and 2082; 12GSDI carries full 4k video on single cable; Highest quality reclocking and cable.
Installation and Initial Setup:
- Unpacking Carefully unpack the V-IO DISTRIBUTION AMPLIFIER and verify that the following items are included:
- V-IO DISTRIBUTION AMPLIFIER.
- Operating Instructions Inspect the unit for any physical damage that may have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at (800) 800-6608. If you are not located within the continental United States, call +1 (310) 333- 0606.
- Connections, Power-On and Initial Setup Plug the power supply into an AC power source (100-240 V @ 50/60 Hz). Attach the Power connector to the Distribution Amplifier. Connect the required cables for video signal input and output (Power must be applied to the V-IO DISTRIBUTION AMPLIFIER for the device to function if the internal battery has not been fully charged). Video will automatically be detected and passed through the device.
Compatible Input Formats:
The following video standards are supported by the Marshall V-IO12-12G 1×2 12G Distribution Amplifier: SD and HD-SDI Inputs 525i, 625i/50 720p/29.97, 30, 50, 59.94, 60 1080p/23.98, 23.98sF, 24, 24sF, 25, 29.97, 30 1035i/59.94, 60 1080i/ 50, 59.94, 60 3G-SDI Inputs YCbCr, YCbCr+A, RGB, RGB+A 1080p/ 60, 59.94, 50 1080p/ 30, 29.97, 25, 24, 23.98, 30sF, 29.97sF, 25sF, 24sF, 23.98sF 1080i/ 60, 59.94, 50 12G-SDI Inputs 2160 50, 59.94, 60 p.
Marshall V-IO12-12G 1×2 12G Distribution Amplifier Specifications:
- CONNECTORS (Per Unit) Video Input 12G-SDI 1 x BNC Female (75 Ω) Video Output (Active Output) 12G-SDI 2 x BNC Female (75 Ω).
- ELECTRICAL Power Consumption < 1 Amp @ 5VDC.
- Operating Temperature Operating Temperature 32°F to 104°F (0°C to 40°C) Storage Temperature -4°F to120°F (-20°C to 50°C).
Marshall V-IO12-12G 1×2 12G Distribution Amplifier Key Features:
- Provides two SDI outputs from one SDI signal source.
- “Universal” Supporting all SDI, HDSDI types up to 12GSDI.
- Compliant with SMPTE ST 259, 292, 344, 424, 2081 and 2082.
- 12GSDI carries full 4k video on single cable.
- Highest quality reclocking and cable equalization.
- Perfect solution to extend high data rate 12G signals.
- Built-in battery backup prevents accidental signal loss.
- LED indicators for signal lock and battery status.
- 5 volt power supply included.
Products related to this item: