Glidecam Professional Camera Stabilization System

The Glidecam Smooth Shooter Professional Camera Stabilization System will allow you to move freely while shooting without any camera instability or shake.


Name (required)


Email (required)


Your Question

Check the box to verify that you are human


Glidecam Professional Camera Stabilization System

The Glidecam Professional Camera Stabilization System is the World’s most sophisticated and affordable body mounted Camera Stabilization System designed for Cameras weighing up to 10 pounds.

The Smooth Shooter System will allow you to walk, run, go up and down stairs, shoot from moving vehicles and travel over uneven terrain without any camera instability or shake.

This system works by isolating your body’s motion from your camera, while your camera is balanced in a relatively motionless and isolated state.

The Smooth Shooter’s Support Arm can be boomed up and down, as well as pivoted in and out, and side-to-side. It is the combined booming and pivoting action of the Support Arm, which isolates your motions from the camera in a way that creates smooth camera footage.

This article does not come with a hand-held stablizer; however, the Glidecam Professional Camera Stabilization System is specifically designed to be used with them. If you already own one of our hand-held stabilizers, then you will be able to use it by simply attaching it to the end of the Smooth Shooter’s Support Arm.

Using the hand-held stabilizer

Your Glidecam hand-held stabilizer does not need to be modified to work with the Glidecam Smooth Shooter. You can use your camcorder’s flip out LCD monitor, or a monitor that is attached to the base of your Glidecam hand-held stabilizer. This allows for remote viewing of the camera’s image without disturbing the orientation of the system.

When using the Glidecam hand-held stabilizer in hand-held mode, it is your arm that carries all of the weight. However, when the Glidecam handheld stabilizers are used with the smooth shooter, it is the Smooth Shooter’s Spring-loaded Support Arm that carries all of the weight.

You will now be able to shoot for extended periods of time, whereas before, the stress associated with handholding the weight reduced your shooting time.

The Glidecam Professional Camera Stabilization System is not just an affordable replacement for the Glidecam V-8; it is a highly developed and meticulously engineered camera stabilization system.

Its ability to shoot smooth imagery within its weight range is extraordinary. It out performs all of the competition in its class, yet remains truly economical.

The smooth shooter stabilizes lightweight cameras using the same degree of sophistication employed to stabilize heavy cameras. With the Glidecam Professional Camera Stabilization System you will be able to acquire the type of smooth footage you’ve always dreamed of.

Glidecam Smooth Shooter Support Arm

The Smooth Shooter’s Dyna-Elastic Support Arm incorporates more than twenty precision radial bearings within its machined T6 aluminum structure. The placement and implementation of these double-shielded bearings produce minimal friction and allow the Dyna-Elastic Support Arm to pivot and boom very smoothly, and with virtually no noise.

Two high-carbon alloy, Extension Springs are employed within the Support Arm’s hardcoat anodized Exo-Skeletal Shell. Utilizing Class Three Levers, the energy of the Extension Springs acts upon internal Fulcrum Points, and provides the Support Arm with its lifting power. The spring tension is field adjustable and allows for varying camera weights.

Our proprietary spring Inter-X-Change system makes the installation and removal of the springs quick and easy. The Support Arm can be setup and used in either a One-Spring Mode, or a Two-Spring Mode. In the One-Spring Mode, the Support Arm can hold a total combined camera and hand-held stabilizer weight of 9 pounds. In the Two-Spring Mode, the Support Arm can hold a total combined camera and hand-held stabilizer weight of 18 pounds.

A key design feature of the Support Arm is that it incorporates our Light-Force technology. This literally means that only a “light” force or effort is required by the operator to hold the arm at any given position, or to boom the arm up and down. It is this Light-Force feature that provides the operator with the optimum amount of camera buoyancy or float.

Glidecam Smooth Shooter Support Vest

The Smooth Shooter Support Vest is lightweight and comfortable can be adjusted to fit a wide range of operators. High endurance, dual density, EVA foam padding and integral T6 aluminum alloy create a vest which can hold and evenly distribute the weight of the system across the operator’s shoulders, back, and hips. Made with 1000 denier cordura fabric, and 7-panel seat belt strapping. For safety, quick release, high impact buckles allow the vest to be removed quickly.

The Glidecam Smooth Shooter System is designed for use with:

  • Glidecam XR-2000, XR-4000, HD-2000, HD-4000 and the DEVIN GRAHAM Signature Series Glidecam Hand-held Stabilizers.

Ask For Price.


There are no reviews yet.

Be the first to review “Glidecam Professional Camera Stabilization System”

Your email address will not be published. Required fields are marked *