Glidecam Gold Sled With Anton Bauer supports film or video cameras weighing from 13 to 38 pounds. Incorporates sophisticated engineering and precision machining to make it lightweight and strong. Is available with one of the various daylight viewable, LCD monitors.
The front panel has a 2-pin Lemo 1B302 style with 12 volt out, two 4-pin Lemo OB304 style with video/power out and one 4-pin Lemo OB304 video/power in connectors. The head also has a custom designed video distribution amp installed for clear video signals, and incorporates a dovetail camera plate for quick front to back balance.
Incorporates 4 bearings inside the handle to yoke connection (the tilt axis). There are 2 bearings on each side of the yoke, providing 4 bearings for the roll axis. There are 2 central main bearings for the pan axis. This doubles the gimbal’s thrust capacity and creates less than a .0002° deflection off true center of Glidecam Gold Sled With Anton Bauer
All parts are machined within .0005° accuracy and are hard coat black. A very tight knurling has been machined onto the Gimbal Tube to improve handling. An easy to replace soft foam covers the handle grip. This pin keeps the upper and lower posts in alignment so the head and base of the gold sled are always parallel to each other.
The base for the Glidecam Gold Sled With Anton Bauer accepts up to three Batteries. These batteries deliver 12 volts to the base (for the monitor) and either 12 or 24 volts (switchable) to the head for use with video or film cameras. The Base incorporates one BNC Video out connector, one 12/24 volt power switch, three circuit breakers and two 4-pin Lemo style OB304 video/12 volt power out connectors.
Glidecam Gold Sled With Anton Bauer features
- Construction- Aluminum and stainless steel
- Load Capacity- 38.0 lb (17.2 kg)
- Dovetail Plate- Yes
- Post- Adjustable from 22″ to 32″ with Gimbal guide scale markings.
- Dynamic Spin- 360 degree panning and tilting
- Monitor- Panasonic TC-7WMS1Monitor- Panasonic TC-7WMS1